Use of Power Transformer
Generation of electrical power at low voltage levels is very cost-effective. Hence electrical power is generated at a low voltage level. Theoretically, this low voltage level power can be transmitted to the receiving end. But if the voltage level of a power is increased, the current of the power is reduced which causes a reduction in ohmic or I2R losses in the system, a reduction in the cross-sectional area of the conductor i.e. reduction in capital cost of the system and it also improves the voltage regulation of the system. Because of these, low-level power must be stepped up for efficient electrical power transmission. This is done by a step-up transformer at the sending side of the power system network. As this high-voltage power may not be distributed to the consumers directly, this must be stepped down to the desired level at the receiving end with the help of a step-down transformer. These are the uses of electrical power transformers in the electrical power system.
Types of Transformer
Transformers can be categorized in different ways, depending on their purpose, use, construction, etc. The types of transformers are as follows:
- Step-Up Transformer & Step-Down Transformer – Generally used for stepping up and down the voltage level of power in transmission and distribution power networks.
- Three-Phase Transformer & Single-Phase Transformer – The former is generally used in the three-phase power systems as it is more cost-effective than the latter but when size matters, it is preferable to use a bank of three single-phase transformers as it is easier to transport three single-phase unit separately than one single three phase unit.
- Electrical Power Transformer, Distribution Transformer & Instrument Transformer – The transformer is generally used in the transmission network and is normally known as a power transformer, distribution transformer is used in the distribution network and this is a lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.
- Two Winding Transformer & Auto Transformer – The former is generally used where the ratio between high voltage and low voltage is greater than 2. It is cost-effective to use later where the ratio between high voltage and low voltage is less than 2.
- Outdoor Transformer & Indoor Transformer – Transformers that are designed for installation outdoors are outdoor transformers and transformers designed for installation indoors are indoor transformers.
Below is the Connection of the Marshalling Box
Applications of power transformer
Power transformers are used in a variety of electrical power transmission and distribution applications. The main function of a power transformer is to transfer electrical energy from one circuit to another while changing the voltage level. This is done to increase the transmission efficiency and to adapt the voltage level to the specific requirements of the load.
Some common applications of power transformers include:
- Electric power transmission: High-voltage power transmission lines are used to transmit electrical energy over long distances. Power transformers are used to step up the voltage at the power generation station, and then step it down at the substation near the load.
- Electric power distribution: Power transformers are used to step down the voltage at substations and distribute it to homes and businesses at a lower voltage.
- Industrial applications: Power transformers are used in industrial plants to adapt the voltage level to the specific requirements of the equipment.
- Electric traction: Power transformers are used in electric trains and trams to step down the voltage from the overhead power lines to the level required by the traction system.
Overall, power transformers are used to transfer energy from one location to another and change voltage levels, to make them more efficient and suitable for the loads.
Related Topic – click here
- What Is Alternating Current? | AC Current, A.C. Series Circuit
- Corona Discharge | Problems Caused By Corona Discharge
- What Is The Difference Between Earthing, Grounding, And Neutral?
- Kirchhoffs Circuit Laws
- Electronics-Semiconductor Device | Semiconductor Device Example
- The 5 Common Insulating Materials | Materials Used For Insulation
- 4 Main Types Of Insulators Used In Overhead Lines | Types Of Insulators Used In Transmission Line
- Electrical Transformers | Use Of Power Transformer
